Cold shrink plastic molded epdm rubber cap

Cold Shrink Plastic Molded Epdm Rubber
  • Seller Suzhou Volsun Electronics Technology Co., Ltd.
  • Min. Order 50 Piece/Pieces molded epdm rubber cap
  • FOB Price US $0.06-1.09 /Piece

Item Details

Port: Shanghai
Supply Ability: 10000000 Piece/Pieces per Week molded epdm rubber cap
Payment Terms: L/C,T/T,Western Union,Paypal

Product Description

Cold shrink plastic molded epdm rubber cap

Description

RUBLS-CAP Cold shrink plastic molded epdm rubber cap environmentally seal and mechanically protect exposed cable ends using no tools, mastics or tapes. Cold shrink plastic molded epdm rubber cap is close-ended, tubular EPDM rubber sleeves that are factory expanded and loaded onto a removable core. When positioned over the end of a cable, or other cylindrical object, the core is removed to provide a reliable seal that protects your cable ends from environmental damage. Cold shrink plastic molded epdm rubber cap is easily installed and cleanly removable. Whether in transit from the manufacturer, stored in the cable yard, or in process in a trench, your cable ends are protected from exposure to moisture, contamination and corrosion..

Four different end caps are available to accommodate a wide range of sizes.

Features

Simple and fast installation, no tools required.

Accommodates size ranges from 11.6mm – 84.Volsunm.

Good abrasion resistance.

Seals tight, retains resiliency and pressure even after prolonged years of ageing and exposure.

Water-resistant.

No mastic or tape required.

No torches or heat required.

Resists fungus.

Resists acids and alkalis.

Resists ozone.

Easily removed.

No training required for installation.

Applications

The Volsun RUBLS-CAP Cold shrinking cable molded epdm rubber cap protect cables, pipes and other cylindrical objects from exposure to moisture, contamination, corrosion, ozone, ultra-violet radiation, physical contact and other environmental hazards.

Installation

The Volsun RUBLS-CAP Cold shrinking cable molded epdm rubber cap install quickly and cleanly without flame or grease. Cold Shrink end caps are factory expanded on removable inner-supporting plastic cores. Once Cold shrinking cable molded epdm rubber cap is positioned for installation around the end of a cable, the supporting core is unwound and removed. With the core removed, the live-memory action of the specially formulated material shrinks the end cap into position. The constant radial pressure of the Cold Shrink material ensures adorable environmental seal. The Cold Shrink material resists abrasion, fungus, acids or alkalis, and retains its resiliency for years. Freezing or overheating due to ambient temperatures encountered during shipping or storage does not impair the end caps.

Installatio

Technical Data

Physical Property(Test Method)

Typical Value

US units (metrical)

Color

Black

300%Modulus(ASTM D 214-87)

480 psi(3.3 MPa)

Ultimate Tensile(ASTM D 412-87)

1400 psi(9.6 MPa)

Ultimate eLONGATION(ASTM D 412-87)

750%

Die C Tear (ASTM G-21)

150 pli (26.3KN/m)

Moisture Absorption-7days in H2O

Wt.Gain 1.8%

Selection Chart

Product Number

Use Range (mm)

CAP-1

11.6 – 20.9

CAP-2

15.9 – 30.1

CAP-3

26.0 – 49.2

CAP-4

45.5 – 84.3

Important Notice

Technical information provided by Volsun is based on experience and/or tests believed to be reliable, but their accuracy is not guaranteed and the results may not be relevant to every user’s application. For this reason Volsun does not accept responsibility or liability, direct or consequential, arising from reliance upon any information provided and the user should determine the suitability of the products for their intended use. Nothing in this statement will be deemed to exclude or restrict Volsun’s liability for death or personal injury arising from its negligence. All questions of liability relating to Volsun products are governed by the seller’s terms of sale subject where applicable to the prevailing law. If any goods supplied or processed by or on behalf of Volsun prove on inspection to be defective in material or workmanship, Volsun will (at its option) replace the same or refund to the Buyer the price paid for the goods or services. Except as set out above, all warranties and conditions, whether express or implied, statutory or otherwise are excluded to the fullest extent permissible at law. Volsun is a trademark of the Volsun Company.

Important Notice

Package Information

SGS Certification

Company show

They trust us

Contact us

Recommended Products

EPDM Rubber Cold Shrink Tube
US $0.1-10 /Piece
Glass Fiber Reinforced Plastics Molded Products
US $1-10 /Piece
EPDM Rubber Cold Shrink Tubing
US $0.2-16.22 /Piece
Heat Shrink Molded Cable Breakout
US $1.08-6.08 /Piece
Low Voltatge Resistant Cold Shrink EPDM
US $0.9-5.9 /Piece
Rubber EPDM Cold Shrink Cable Sleeve
US $1.06-6.08 /Meter
Custom Made Acid Resistance Epdm Molded
US $0.01-0.9 /Piece
PENIS SLEEVE FOR SEX TOY 09751895964
Other 2600-2800 /Piece